This is a test release with full throttle curve edit logic. Current functionality: - all points for throttle curve can be edited -100 <-> 100 - preset endpoints are reflected in logic - when last editable value is 0, corresponding non-editable value is also 0; allows zero on one side - when last editable value is negative on either side, corresponding non-editable value is -100 - when last editable value is positive on either side, corresponding non-editable value is 100 This is NOT present on curve visualization, hence test release. With luck, full release will have this reflected. Best example use case: boat that has throttle in both directions. Set the throttle curve shape to `^`, both sides negative. (Side note, yes it is not really logical that forward throttle is mapped to negative point values, but this is so in original, I want to keep changes to minimum). For test release I give a direct binary upload; I will use usual patch logic on full release.

Small release that addresses #29 Set as pre-release because I don't want to update readme just yet. Removes the (car) icon from model name, allowing longer names to fit on screen.

Finally gives me #25 as I wanted it to. When main screen lock is active, values sent to transmitter on channels 1 through 4 are frozen to last values before lock. See README.md for more details and examples.

This is a release candidate for channel lock(out), I am not fully satisfied with 0% being default values rather than trims and subtrims, but for now it is better than pondering all over it forever. I will run this, see how I like it and how ugly it is to use, and adjust accordingly.

Ported all old features: - EN and DE translations without scrolling and with more coherency - 4NiMh battery display option - Multiplicative mixing (e.g. for "Kid mode") - Quick toggle Progmix 1 and 2 without menu dive New feature in this release: - Per model "Quick toggle" key selection (or select none) - Inside Progmix menu, choose a key that will turn that Progmix on and off, inside "L(ead)" channel option. - Select NULL to not have any keys - Toggle Progmix with single key - As above, choose "TGGL" as one key and some actual key as other. - Now pressing that key will toggle Progmix 1 and 2 exclusively - You can choose if they go `1 -> 2 -> No -> 1 ...` or `1 -> 2 -> 1 ...` - Cycle depends if TGGL was used in first or second Progmix Submit your feedback and ideas into https://github.com/ELynx/ddf-350-modding/issues/16

Ported all old features: - EN and DE translations without scrolling and with more coherency - 4NiMh battery display option - Multiplicative mixing (e.g. for "Kid mode") - Quick toggle Progmix 1 and 2 without menu dive New feature in this release: - Per model "Quick toggle" key selection (or select none) > Inside Progmix menu, choose a key that will turn that Progmix on and off, inside "L(ead)" channel option. Select NULL to not have any keys - Toggle Progmix with single key > As above, choose "TGGL" as one key and some actual key as other. Now pressing that key will toggle Progmix 1 and 2 exclusively You can choose if they go `1 -> 2 -> No -> 1 ...` or `1 -> 2 -> 1 ...` depending if 1st or 2nd is chosen as toggle Release will have this more clear On release I will make a video Submit your feedback and ideas into https://github.com/ELynx/ddf-350-modding/issues/16

With this release porting to 1.1.3 is formally complete. Translations EN and DE complete unless better ideas are suggested 4NiMh display is ported Multiplicative mix is ported Quick toggle ported as well Alpha because now both timer and quick toggle are live at the same time, and it is visually annoying (but fully functional). I am working on making per-model quick toggle, thus timer will be standalone and quick toggle will be standalone. *NEW FEATURE* Quick progmix toggle with single button. I will likely make a video about this when I release it. In short: - Choose TG (stands for ToGgle) as one of buttons that works with quick toggle. - Choose some actual button as another button. - Now pressing chosen button will toggle states of progmix 1 and 2 interdependently - I will document it better, but you can choose if they will go 1st -> 2nd -> none -> 1sr ... or 1st <-> 2nd based when TG is top or bottom button. Please experiment, you will get what I mean.

Useful progress on porting to 1.1.3 - EN and DE translations - 4 NiMh battery display option - Multiplicative ProgMIX, used e.g. for Kid Mode As usual, apply to clean 1.1.3