Can't flash image

Output below `ivy@carthinghost:~/superbird-tool $ sudo python3 superbird_tool.py --restore_device ../debian_v1.8_2024-01-03 Spotify Car Thing (superbird) toolkit, v0.1.0, by bishopdynamics https://github.com/bishopdynamics/superbird-tool Found device booted in USB Mode (buttons 1 & 4 held at boot) Entering USB Burn Mode writing images/superbird.bl2.encrypted.bin at 0xfffa0000 writing to: 0xfffa0000 AMLC dataSize=16384, offset=65536, seq=0 [DONE] AMLC dataSize=49152, offset=393216, seq=1 [DONE] AMLC dataSize=16384, offset=229376, seq=2 [DONE] AMLC dataSize=49152, offset=180224, seq=3 [DONE] AMLC dataSize=16384, offset=65536, seq=4 [DONE] AMLC dataSize=1224048, offset=81920, seq=5 [DONE] [BL2 END] Waiting for device... Device is now in USB Burn Mode executing bulkcmd: "amlmmc part 1" Error (USBTimeoutError): bulkcmd timed out or failed! This can happen if the device ends up in a strange state, like as the result of a previously failed command Try power cycling the device by pulling the cable, and then boot up and try again You might need to do this multiple times If the device is connected through a USB hub, try connecting it directly to a port on your machine ivy@carthinghost:~/superbird-tool $ sudo python3 superbird_tool.py --restore_device ../debian_v1.8_2024-01-03 Spotify Car Thing (superbird) toolkit, v0.1.0, by bishopdynamics https://github.com/bishopdynamics/superbird-tool Found device booted in USB Burn Mode (ready for commands) restoring entire device from dumpfiles in ../debian_v1.8_2024-01-03 Wiping env partition executing bulkcmd: "amlmmc env" result: Bulkcmd failed: amlmmc env -> Error (BulkcmdException): bulkcmd timed out or failed! This can happen if the device ends up in a strange state, like as the result of a previously failed command Try power cycling the device by pulling the cable, and then boot up and try again You might need to do this multiple times If the device is connected through a USB hub, try connecting it directly to a port on your machine ivy@carthinghost:~/superbird-tool $ sudo python3 superbird_tool.py --restore_device ../debian_v1.8_2024-01-03 Spotify Car Thing (superbird) toolkit, v0.1.0, by bishopdynamics https://github.com/bishopdynamics/superbird-tool Found device booted in USB Mode (buttons 1 & 4 held at boot) Entering USB Burn Mode writing images/superbird.bl2.encrypted.bin at 0xfffa0000 writing to: 0xfffa0000 AMLC dataSize=16384, offset=65536, seq=0 [DONE] AMLC dataSize=49152, offset=393216, seq=1 [DONE] AMLC dataSize=16384, offset=229376, seq=2 [DONE] AMLC dataSize=49152, offset=180224, seq=3 [DONE] AMLC dataSize=16384, offset=65536, seq=4 [DONE] AMLC dataSize=1224048, offset=81920, seq=5 [DONE] [BL2 END] Waiting for device... Device is now in USB Burn Mode executing bulkcmd: "amlmmc part 1" result: success restoring entire device from dumpfiles in ../debian_v1.8_2024-01-03 Wiping env partition executing bulkcmd: "amlmmc env" result: success executing bulkcmd: "amlmmc erase env" result: success initializing env subsystem executing bulkcmd: "amlmmc env" result: success sending env (3358 bytes) writing to: 0x13000000 executing bulkcmd: "env import -t 0x13000000 0xd1e" result: success executing bulkcmd: "env save" result: success Validating size of partition: fip_a size: 0x400000 4MB - OK writing partition: "fip_a" 0x42000+0x380000 from file: ../debian_v1.8_2024-01-03/fip_a.dump chunk_size: 512.0KB, speed: 1.35MB/s progress: 88% remaining: 0MB / 4MB Validating size of partition: fip_b size: 0x400000 4MB - OK writing partition: "fip_b" 0x48000+0x380000 from file: ../debian_v1.8_2024-01-03/fip_b.dump chunk_size: 512.0KB, speed: 1.36MB/s progress: 88% remaining: 0MB / 4MB Validating size of partition: logo size: 0x800000 8MB - OK writing partition: "logo" 0x4e000+0x780000 from file: ../debian_v1.8_2024-01-03/logo.dump chunk_size: 512.0KB, speed: 1.56MB/s progress: 94% remaining: 0MB / 8MB Validating size of partition: dtbo_a size: 0x400000 4MB - OK writing partition: "dtbo_a" 0x56000+0x380000 from file: ../debian_v1.8_2024-01-03/dtbo_a.dump chunk_size: 512.0KB, speed: 1.36MB/s progress: 88% remaining: 0MB / 4MB Validating size of partition: dtbo_b size: 0x400000 4MB - OK writing partition: "dtbo_b" 0x5c000+0x380000 from file: ../debian_v1.8_2024-01-03/dtbo_b.dump chunk_size: 512.0KB, speed: 1.36MB/s progress: 88% remaining: 0MB / 4MB Validating size of partition: vbmeta_a size: 0x100000 1MB - OK writing partition: "vbmeta_a" 0x62000+0x0 from file: ../debian_v1.8_2024-01-03/vbmeta_a.dump chunk_size: 1024.0KB, speed: 0MB/s progress: 0% remaining: 0MB / 1MB Validating size of partition: vbmeta_b size: 0x100000 1MB - OK writing partition: "vbmeta_b" 0x66800+0x0 from file: ../debian_v1.8_2024-01-03/vbmeta_b.dump chunk_size: 1024.0KB, speed: 0MB/s progress: 0% remaining: 0MB / 1MB Validating size of partition: boot_a size: 0x1000000 16MB - OK writing partition: "boot_a" 0x6b000+0xf80000 from file: ../debian_v1.8_2024-01-03/boot_a.dump chunk_size: 512.0KB, speed: 1.36MB/s progress: 97% remaining: 0MB / 16MB Validating size of partition: boot_b size: 0x1000000 16MB - OK writing partition: "boot_b" 0x77000+0xf80000 from file: ../debian_v1.8_2024-01-03/boot_b.dump chunk_size: 512.0KB, speed: 1.36MB/s progress: 97% remaining: 0MB / 16MB Validating size of partition: misc size: 0x800000 8MB - OK writing partition: "misc" 0x28f0b0+0x780000 from file: ../debian_v1.8_2024-01-03/misc.dump chunk_size: 512.0KB, speed: 1.36MB/s progress: 94% remaining: 0MB / 8MB Validating size of partition: settings size: 0x10000000 256MB - OK writing partition: "settings" 0x2970b0+0xff80000 from file: ../debian_v1.8_2024-01-03/settings.ext4 chunk_size: 512.0KB, speed: 1.36MB/s progress: 100% remaining: 0MB / 256MB Validating size of partition: system_a size: 0x2040b000 516MB - OK writing partition: "system_a" 0x83000+0x20400000 from file: ../debian_v1.8_2024-01-03/system_a.ext2 chunk_size: 44.0KB, speed: 1.36MB/s progress: 100% remaining: 0MB / 516MB Validating size of partition: system_b size: 0x2040b000 516MB - OK writing partition: "system_b" 0x189058+0x20400000 from file: ../debian_v1.8_2024-01-03/system_b.ext2 chunk_size: 44.0KB, speed: 1.35MB/s progress: 100% remaining: 0MB / 516MB Validating size of partition: data size: 0x889ea000 2186MB - ... Bulkcmd failed: amlmmc read data 0x13000000 0x889e9e00 0x200 -> failed: Error (BulkcmdException): bulkcmd timed out or failed! This can happen if the device ends up in a strange state, like as the result of a previously failed command Try power cycling the device by pulling the cable, and then boot up and try again You might need to do this multiple times If the device is connected through a USB hub, try connecting it directly to a port on your machine`