[Bug]: Incorrect Refresh Rate Being Used For My Display
bug
### Already reported ? *
- [x] I have searched the existing open and closed issues.
### Regression?
No
### System Info and Version
<details> <summary>System/Version info</summary>
```
System:
Host: Arch-Linux Kernel: 6.19.11-arch1-1 arch: x86_64 bits: 64
Desktop: Hyprland v: 0.54.3 Distro: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: ASUS TUF Gaming F16 FX608JMR_FX608JMR
v: 1.0 serial: <superuser required>
Mobo: ASUSTeK model: FX608JMR v: 1.0 serial: <superuser required>
Firmware: UEFI vendor: American Megatrends LLC. v: FX608JMR.309
date: 11/03/2025
Battery:
ID-1: BAT0 charge: 90.2 Wh (100%) condition: 90.2/90 Wh (100.3%)
CPU:
Info: 16-core (8-mt/8-st) model: Intel Core i7-14650HX bits: 64
type: MST AMCP cache: L2: 24 MiB
Speed (MHz): avg: 2310 min/max: 800/5000:5200:3700 cores: 1: 2310 2: 2310
3: 2310 4: 2310 5: 2310 6: 2310 7: 2310 8: 2310 9: 2310 10: 2310 11: 2310
12: 2310 13: 2310 14: 2310 15: 2310 16: 2310 17: 2310 18: 2310 19: 2310
20: 2310 21: 2310 22: 2310 23: 2310 24: 2310
Graphics:
Device-1: Intel Raptor Lake-S UHD Graphics driver: i915 v: kernel
Device-2: NVIDIA GB206M [GeForce RTX 5060 Max-Q / Mobile] driver: nvidia
v: 595.58.03
Device-3: Shinetech ASUS FHD webcam driver: uvcvideo type: USB
Display: wayland server: X.org v: 1.21.1.21 with: Xwayland v: 24.1.9
compositor: Hyprland v: 0.54.3 driver: X: loaded: modesetting,nvidia
dri: iris gpu: i915,nv_platform,nvidia,nvidia-nvswitch resolution:
1: 1920x1080~60Hz 2: 1920x1200~165Hz
API: EGL v: 1.5 drivers: iris,nvidia,swrast
platforms: gbm,wayland,x11,surfaceless,device
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 595.58.03
renderer: NVIDIA GeForce RTX 5060 Laptop GPU/PCIe/SSE2
Info: Tools: api: eglinfo,glxinfo de: kscreen-doctor
gpu: nvidia-settings,nvidia-smi wl: nwg-displays x11: xprop,xrandr
Audio:
Device-1: Intel Raptor Lake High Definition Audio driver: snd_hda_intel
Device-2: NVIDIA GB206 High Definition Audio driver: snd_hda_intel
API: ALSA v: k6.19.11-arch1-1 status: kernel-api
Server-1: PipeWire v: 1.6.2 status: active
Network:
Device-1: Realtek RTL8852CE PCIe 802.11ax Wireless Network
driver: rtw89_8852ce
IF: wlp108s0 state: up mac: f4:28:9d:57:b1:f3
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp109s0 state: down mac: 30:c5:99:85:fa:6b
Bluetooth:
Device-1: Foxconn / Hon Hai Bluetooth Radio driver: btusb type: USB
Report: btmgmt ID: hci0 state: up address: F4:28:9D:57:B1:F4 bt-v: 5.3
RAID:
Hardware-1: Intel RST Volume Management Device Controller driver: vmd
Drives:
Local Storage: total: 953.87 GiB used: 35.06 GiB (3.7%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WD PC SN5000S
SDEQNSJ-1T00-1002 size: 953.87 GiB
Partition:
ID-1: / size: 383.43 GiB used: 34.95 GiB (9.1%) fs: ext4 dev: /dev/nvme0n1p7
ID-2: /boot/efi size: 2.2 GiB used: 109.4 MiB (4.8%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 45.5 C mobo: N/A
Fan Speeds (rpm): cpu: 3000 fan-1: 3060
Info:
Memory: total: 16 GiB note: est. available: 15.22 GiB used: 5.28 GiB (34.7%)
Processes: 455 Uptime: 1h 4m Shell: Zsh inxi: 3.3.40
```
</details>
### KooL's Dots version
v2.3.20
### Description
I use 2 monitors, one monitor is my hdmi external monitor (60hz) and then i have a main screen that runs at 165hz. now, when i plug in my external monitor my fps on my main screen also goes to 60, and then when i remove it, it turns back to 165 hz. and its instant
### How to reproduce
It should exist on the version of jakoolits dots i installed since i installed them yesterday
### install logs, images or videos
╭─ash@Arch-Linux ~
╰─➤ hyprctl monitors
Monitor eDP-1 (ID 0):
1920x1200@165.00400 at 3840x0
description: AU Optronics B160UAN07.K
make: AU Optronics
model: B160UAN07.K
physical size (mm): 340x220
serial:
active workspace: 1 (1)
special workspace: 0 ()
reserved: 0 0 0 0
scale: 1.00
transform: 0
focused: no
dpmsStatus: 1
vrr: false
solitary: 0
solitaryBlockedBy: windowed mode,missing candidate
activelyTearing: false
tearingBlockedBy: next frame is not torn,user settings,missing candidate
directScanoutTo: 0
directScanoutBlockedBy: user settings,software renders/cursors,missing candidate
disabled: false
currentFormat: XRGB8888
mirrorOf: none
availableModes: 1920x1200@165.00Hz 1920x1200@60.00Hz
colorManagementPreset: srgb
sdrBrightness: 1.00
sdrSaturation: 1.00
sdrMinLuminance: 0.20
sdrMaxLuminance: 80
Monitor HDMI-A-2 (ID 1):
1920x1080@60.00000 at 1920x0
description: AOC 2279WH JDB2G1800179
make: AOC
model: 2279WH
physical size (mm): 480x270
serial: JDB2G1800179
active workspace: 2 (2)
special workspace: 0 ()
reserved: 0 35 0 0
scale: 1.00
transform: 0
focused: yes
dpmsStatus: 1
vrr: false
solitary: 0
solitaryBlockedBy: windowed mode,missing candidate
activelyTearing: false
tearingBlockedBy: next frame is not torn,user settings,missing candidate
directScanoutTo: 0
directScanoutBlockedBy: user settings,software renders/cursors,missing candidate
disabled: false
currentFormat: XRGB8888
mirrorOf: none
availableModes: 1920x1080@60.00Hz 1920x1080@59.94Hz 1920x1080@50.00Hz 1680x1050@59.95Hz 1280x1024@75.03Hz 1280x1024@60.02Hz 1440x900@59.89Hz 1280x960@60.00Hz 1280x720@60.00Hz 1280x720@59.94Hz 1280x720@50.00Hz 1024x768@75.03Hz 1024x768@70.07Hz 1024x768@60.00Hz 800x600@75.00Hz 800x600@72.19Hz 800x600@60.32Hz 800x600@56.25Hz 720x576@50.00Hz 720x480@59.94Hz 640x480@75.00Hz 640x480@72.81Hz 640x480@59.94Hz 640x480@59.93Hz
colorManagementPreset: srgb
sdrBrightness: 1.00
sdrSaturation: 1.00
sdrMinLuminance: 0.20
sdrMaxLuminance: 80
This is the output of hyprctl monitors when im having the issue
0 条评论