[V3.4.82EN] Picture app: Short touch not switching image with Auto Display OFF

Hello GeekMagicClock, I have recently picked up your awesome little device (SmallTV Pro) and enjoyed it very much. Updating the firmware also worked fine. So, I have updated my recieved device from V3.3.76EN to **V3.4.82EN**. After that I noticed the supposed issue in the Picture app. **Situation:** - Have multiple images (JPG and GIF) uploaded in the Picture app section in the web interface. - Auto Display mode is OFF. - Choose a picture to display with clicking the Set button. - Open the Picture app on the device. - Single image gets displayed fine (JPG static or GIF looping endlessly). - Short touch on device top does nothing/hangs up GIF. **Bug:** - Inside the Picture app with Auto Display OFF, doing a short touch on the device top does not switch from the selected image to the next image. It stays at the current image and if it is a GIF, it will hang up on the display. - The image also is stuck (and hangs up) when I use the Quick Navigation buttons (Left / Right) in the System settings in the web interface. - Exiting and re-entering the Picture app (via long touch or in the web interface) fixes the display state: It displays the selected image again normally, and a GIF plays normal in loop again. - Does not affect Auto Display ON (then it will switch the image displayed on short touch/with the web interface navigation). **Extra bug:** - In the web interface, clicking the Select button on the same GIF that is already selected will hang it up on the device screen now. - Fixed with selecting another image or exiting and re-entering the Picture app. **Expected:** - Auto Display OFF: On short tap on device top, the image should switch to the next image (JPG or GIF) and display/loop it endlessly until I short tap again. - Web interface - clicking Set button on already selected image/GIF: Correctly reload the image on display (and not hang it up) or easier, discard the input (do nothing, no switching on device). Sadly I cannot remember if switching the image with short tap while Auto Display is OFF, worked on the old firmware V3.3.76EN. Sorry! I hope my report helps you, and if you already fixed this issue in an upcoming firmware update, I will patiently wait for it.