Bluetooth in Receive mode

Hello Wolle, I am having a problem about the BLUETOOTH operation. When powering up the unit, 50% of the time it come up in RECEIVE mode. In the serial port log, it does show receive mode active. i can change it to EMITTER either by the web page or from the radio BT menu. I built another radio with a new BT module, and i get the same problem. ****** I live in a condo and many wifi stuff like tv and BT device are detected by the WebRadio. ****** Here is a list of scanned devices: Samsung 7 Series (65) Fibe TV Box Fibe TV Box Doing a search for this problem did not show anything. So it must be an in house problem. And i suspect the Fibe TV Box because the internet provider did a magor change in all the condo units just about the time i started having problems. **Here is a Google search about Fibe TV Box:** Bell Fibe TV boxes, particularly the newer wireless models (like the VIP7802 or 5662W), operate differently than typical Wi-Fi devices, often using a dedicated, hidden wireless network to ensure high-quality, uninterrupted streaming . They interact with other devices primarily through the Bell Home Hub modem/router, often prioritizing their own bandwidth to avoid interference from general home Wi-Fi traffic. I will do a test in a private home where there is no interference. Thanks for you time...